Having a proper size bird house entrance hole is essential for a safe house that will protect nesting birds and their offspring, but holes often get damaged by wear and use. Fixing a hole is not difficult, however, and can keep a familiar, attractive bird house usable for many more nesting seasons.
How Holes Get Damaged
Bird house holes can gradually be damaged just from simple use, as birds move in and out of the entrance dozens of times a day, each time gripping the edge with their sharp talons or rubbing against it with their feathers. Fledglings may also damage the hole by pecking at it as they wait for their next meal or explore whatever they can reach, and predators such as raccoons, rats, squirrels or mice will also chew on the hole to attempt to reach the eggs or chicks for an easy meal. Over time, even small scratches and nibbles can add up, gradually increasing the size of the entrance hole.
Problems with Oversized Entrances
If a bird house entrance hole grows just 1/8 or 1/4 of an inch, different bird species – such as the house sparrow or European starling – will be able to get inside and may evict, injure or even kill the nesting or brooding birds. But the risk from predators is only one problem that a larger entrance hole can create. Parent birds may grow insecure if the entrance to their home is too large, and they could decide to abandon their nest or chicks if they feel the risk is too great. A larger hole may also permit excessive rain or wind into the house, which could drown or chill the nestlings, causing illness or death. Excessive sun shining through the hole onto the birds could also cause them to overheat and suffer from heat stroke.
Because of these problems, it is always best to regularly measure bird house entrance holes and ensure they are not being subtly enlarged. If they are growing larger, fixing them can help minimize any problems and keep birds interested in the house.
How to Fix a Bird House Entrance Hole
When signs of damage or enlargement are noticeable around a bird house entrance hole, it is time to fix the hole and keep the nesting birds safe. There are three easy ways to fix bird house entrances:
- Cover Plates: Adding an extra cover plate over the existing hole is the easiest way to repair a bird house entrance. Ideally, the plate should be made of a sturdy material that will resist chewing, gnawing or scratches, such as sheet metal, tile, stone or thick plastic. Center the new hole in the plate, and double check that the new entrance is the proper dimension for the birds that use the house. Smooth rough edges around the hole's rim so it will not tempt young birds to chew or will not injure birds as they move in and out. The plate could be nailed or screwed in place, or can be attached with a strong, all-weather adhesive.
- Hole Extenders: Adding a thick extender to create a small tunnel leading into the bird house is a great way to not only repair the hole, but also provide extra protection from the weather and make it more difficult for predators to reach inside the house. Commercial hole extenders are available either as plain plastic tubes or decorative versions that resemble thick natural branches. It is easy to drill a hole extender into a thick block of wood and attach it to the front of the bird house over the existing hole, just as a cover plate is attached.
- New Entrance Panels: When an entrance hole has been severely damaged or the bird house needs additional repairs, it may be best to replace the entire front panel of the house, complete with a new, sturdy hole of the proper size. A thicker front panel can provide extra protection and insulation for the entire house. Replacing the panel is also a good time to thoroughly clean the bird house and make any other repairs that are needed.
More Tips for Protecting Entrance Holes
Once the bird house entrance hole is fixed and is again the proper size for the exact birds you want to invite to be residents, it is important to take additional steps to make the house attractive to nesting birds and protect it from predators.
- Use the proper bird house dimensions for interior height and area so the birds have enough space for a growing brood.
- Use baffles and other techniques to protect the bird house from predators and keep the birds safe no matter how large or small the entrance hole.
- If a completely new house is needed, opt for a house made from recycled plastic, such as the Duncraft Eco-Strong Bird House, or other durable materials that are resistant to damage around the entrance hole.
Over time, bird house entrance holes can be dangerously enlarged and put nesting birds at risk. There are easy ways to fix bird house entrances, however, and every cavity-nesting bird can have a safe, secure home to use during breeding season.
Photo – Bird House Entrance © Mike Haller